L2-1/2X1-1/2X1/4
L · AISC Shapes Database v15.0 · United States
L2-1/2X1-1/2X1/4 is a l 63.5 mm deep with a 38.1 mm flange, weighing 4.8 kg/m. The dimensions below are the published AISC Shapes Database v15.0 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open L2-1/2X1-1/2X1/4 in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 63.5 mm | 2.50 in |
| Flange width, bf | 38.1 mm | 1.50 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 6.4 mm | 0.250 in |
| Mass per metre | 4.8 kg/m | 3.2 lb/ft |
| Area, A | 611 mm² | 0.95 in² |
| Second moment, Ix | 247,242 mm⁴ | 0.6 in⁴ |
| Second moment, Iy | 66,597 mm⁴ | 0.2 in⁴ |
Derived section properties
Integrated from a square-cornered outline: no root radius is published for this standard, and that is material a rolled section really has, so these run slightly below the published values. For L2-1/2X1-1/2X1/4 the computed area is 1.01% from published and Ix 0.54%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 5,958 mm³ |
| Elastic modulus, Zy | 2,347 mm³ |
| Plastic modulus, Sx | 10,562 mm³ |
| Plastic modulus, Sy | 4,321 mm³ |
| Radius of gyration, rx | 20.2 mm |
| Radius of gyration, ry | 10.5 mm |
| Principal maximum, Imax (derived) | 272,035 mm⁴ |
| Principal minimum, Imin (derived) | 40,951 mm⁴ |
| Principal axis angle, θp | 19.6° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AISC Shapes Database v15.0 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API