L3X2X1/4
L · AISC Shapes Database v15.0 · United States
L3X2X1/4 is a l 76.2 mm deep with a 50.8 mm flange, weighing 6.1 kg/m. The dimensions below are the published AISC Shapes Database v15.0 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open L3X2X1/4 in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 76.2 mm | 3.00 in |
| Flange width, bf | 50.8 mm | 2.00 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 6.4 mm | 0.250 in |
| Mass per metre | 6.1 kg/m | 4.1 lb/ft |
| Area, A | 768 mm² | 1.19 in² |
| Second moment, Ix | 453,692 mm⁴ | 1.1 in⁴ |
| Second moment, Iy | 162,330 mm⁴ | 0.4 in⁴ |
Derived section properties
Integrated from a square-cornered outline: no root radius is published for this standard, and that is material a rolled section really has, so these run slightly below the published values. For L3X2X1/4 the computed area is 0.20% from published and Ix 0.26%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 8,879 mm³ |
| Elastic modulus, Zy | 4,262 mm³ |
| Plastic modulus, Sx | 15,939 mm³ |
| Plastic modulus, Sy | 7,676 mm³ |
| Radius of gyration, rx | 24.3 mm |
| Radius of gyration, ry | 14.6 mm |
| Principal maximum, Imax (derived) | 522,172 mm⁴ |
| Principal minimum, Imin (derived) | 93,461 mm⁴ |
| Principal axis angle, θp | 23.8° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AISC Shapes Database v15.0 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API