L4X3X1/2
L · AISC Shapes Database v15.0 · United States
L4X3X1/2 is a l 101.6 mm deep with a 76.2 mm flange, weighing 16.5 kg/m. The dimensions below are the published AISC Shapes Database v15.0 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open L4X3X1/2 in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 101.6 mm | 4.00 in |
| Flange width, bf | 76.2 mm | 3.00 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 12.7 mm | 0.500 in |
| Mass per metre | 16.5 kg/m | 11.1 lb/ft |
| Area, A | 2,097 mm² | 3.25 in² |
| Second moment, Ix | 2,101,969 mm⁴ | 5.1 in⁴ |
| Second moment, Iy | 998,955 mm⁴ | 2.4 in⁴ |
Derived section properties
Integrated from a square-cornered outline: no root radius is published for this standard, and that is material a rolled section really has, so these run slightly below the published values. For L4X3X1/2 the computed area is better than 0.01% from published and Ix 0.03%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 30,949 mm³ |
| Elastic modulus, Zy | 18,275 mm³ |
| Plastic modulus, Sx | 52,943 mm³ |
| Plastic modulus, Sy | 33,222 mm³ |
| Radius of gyration, rx | 31.7 mm |
| Radius of gyration, ry | 21.9 mm |
| Principal maximum, Imax (derived) | 2,557,445 mm⁴ |
| Principal minimum, Imin (derived) | 552,618 mm⁴ |
| Principal axis angle, θp | 28.5° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AISC Shapes Database v15.0 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API