L6X3-1/2X1/2
L · AISC Shapes Database v15.0 · United States
L6X3-1/2X1/2 is a l 152.4 mm deep with a 88.9 mm flange, weighing 22.8 kg/m. The dimensions below are the published AISC Shapes Database v15.0 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open L6X3-1/2X1/2 in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 152.4 mm | 6.00 in |
| Flange width, bf | 88.9 mm | 3.50 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 12.7 mm | 0.500 in |
| Mass per metre | 22.8 kg/m | 15.3 lb/ft |
| Area, A | 2,903 mm² | 4.50 in² |
| Second moment, Ix | 6,909,442 mm⁴ | 16.6 in⁴ |
| Second moment, Iy | 1,764,821 mm⁴ | 4.2 in⁴ |
Derived section properties
Integrated from a square-cornered outline: no root radius is published for this standard, and that is material a rolled section really has, so these run slightly below the published values. For L6X3-1/2X1/2 the computed area is better than 0.01% from published and Ix 0.04%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 69,427 mm³ |
| Elastic modulus, Zy | 26,117 mm³ |
| Plastic modulus, Sx | 122,903 mm³ |
| Plastic modulus, Sy | 47,625 mm³ |
| Radius of gyration, rx | 48.8 mm |
| Radius of gyration, ry | 24.7 mm |
| Principal maximum, Imax (derived) | 7,595,496 mm⁴ |
| Principal minimum, Imin (derived) | 1,080,327 mm⁴ |
| Principal axis angle, θp | 19.0° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AISC Shapes Database v15.0 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API