L6X3-1/2X5/16
L · AISC Shapes Database v15.0 · United States
L6X3-1/2X5/16 is a l 152.4 mm deep with a 88.9 mm flange, weighing 14.6 kg/m. The dimensions below are the published AISC Shapes Database v15.0 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open L6X3-1/2X5/16 in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 152.4 mm | 6.00 in |
| Flange width, bf | 88.9 mm | 3.50 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 8.0 mm | 0.313 in |
| Mass per metre | 14.6 kg/m | 9.8 lb/ft |
| Area, A | 1,852 mm² | 2.87 in² |
| Second moment, Ix | 4,536,923 mm⁴ | 10.9 in⁴ |
| Second moment, Iy | 1,182,097 mm⁴ | 2.8 in⁴ |
Derived section properties
Integrated from a square-cornered outline: no root radius is published for this standard, and that is material a rolled section really has, so these run slightly below the published values. For L6X3-1/2X5/16 the computed area is 0.19% from published and Ix 0.09%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 44,846 mm³ |
| Elastic modulus, Zy | 17,096 mm³ |
| Plastic modulus, Sx | 79,618 mm³ |
| Plastic modulus, Sy | 30,335 mm³ |
| Radius of gyration, rx | 49.5 mm |
| Radius of gyration, ry | 25.3 mm |
| Principal maximum, Imax (derived) | 5,016,464 mm⁴ |
| Principal minimum, Imin (derived) | 712,640 mm⁴ |
| Principal axis angle, θp | 19.4° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AISC Shapes Database v15.0 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API