L8X4X7/16
L · AISC Shapes Database v15.0 · United States
L8X4X7/16 is a l 203.2 mm deep with a 101.6 mm flange, weighing 25.6 kg/m. The dimensions below are the published AISC Shapes Database v15.0 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open L8X4X7/16 in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 203.2 mm | 8.00 in |
| Flange width, bf | 101.6 mm | 4.00 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 11.1 mm | 0.438 in |
| Mass per metre | 25.6 kg/m | 17.2 lb/ft |
| Area, A | 3,297 mm² | 5.11 in² |
| Second moment, Ix | 14,235,115 mm⁴ | 34.2 in⁴ |
| Second moment, Iy | 2,509,876 mm⁴ | 6.0 in⁴ |
Derived section properties
Integrated from a square-cornered outline: no root radius is published for this standard, and that is material a rolled section really has, so these run slightly below the published values. For L8X4X7/16 the computed area is 0.86% from published and Ix 0.12%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 108,381 mm³ |
| Elastic modulus, Zy | 31,202 mm³ |
| Plastic modulus, Sx | 188,816 mm³ |
| Plastic modulus, Sy | 56,198 mm³ |
| Radius of gyration, rx | 66.0 mm |
| Radius of gyration, ry | 27.7 mm |
| Principal maximum, Imax (derived) | 15,133,151 mm⁴ |
| Principal minimum, Imin (derived) | 1,593,019 mm⁴ |
| Principal axis angle, θp | 15.1° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AISC Shapes Database v15.0 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API