StructureCalcs35 x 35 x 3.0 SHS
Square Hollow Section · AS/NZS 1163 · Australia / New Zealand
35 x 35 x 3.0 SHS is a square hollow section 35 × 35 mm with a 3.0 mm wall, weighing 2.8 kg/m. The dimensions below are the published AS/NZS 1163 values; the drawing is generated from them.
Square Hollow Sections carry equal stiffness about both geometric axes, which makes them a natural column and truss-chord choice.
Analyse this section, or combine it with plates and other shapes.
Open 35 x 35 x 3.0 SHS in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Overall depth, d | 35 mm | 1.38 in |
| Overall width, b | 35 mm | 1.38 in |
| Wall thickness, t | 3.0 mm | 0.118 in |
| Mass per metre | 2.8 kg/m | 1.9 lb/ft |
| Area, A | 361 mm² | 0.56 in² |
| Second moment, Ix | 59,483 mm⁴ | 0.1 in⁴ |
| Second moment, Iy | 59,483 mm⁴ | 0.1 in⁴ |
Derived section properties
Integrated from the section's own outline including its outside corner radii, whose arcs are integrated analytically rather than approximated by facets. For 35 x 35 x 3.0 SHS the computed area agrees with the published value to 0.01% and Ix to better than 0.01%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 3,399 mm³ |
| Elastic modulus, Zy | 3,399 mm³ |
| Plastic modulus, Sx | 4,229 mm³ |
| Plastic modulus, Sy | 4,229 mm³ |
| Radius of gyration, rx | 12.8 mm |
| Radius of gyration, ry | 12.8 mm |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed.
Neighbouring sizes
Where these numbers come from
Published AS/NZS 1163 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API