75 x 75 x 5 EA
EA · AS/NZS 3679.1 · Australia / New Zealand
75 x 75 x 5 EA is a ea 75.0 mm deep with a 75.0 mm flange, weighing 5.3 kg/m. The dimensions below are the published AS/NZS 3679.1 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open 75 x 75 x 5 EA in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 75.0 mm | 2.95 in |
| Flange width, bf | 75.0 mm | 2.95 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 4.6 mm | 0.181 in |
| Mass per metre | 5.3 kg/m | 3.5 lb/ft |
| Area, A | 672 mm² | 1.04 in² |
| Second moment, Ix | 355,000 mm⁴ | 0.9 in⁴ |
| Second moment, Iy | 355,000 mm⁴ | 0.9 in⁴ |
| Principal maximum, Imax | 563,000 mm⁴ | 1.4 in⁴ |
| Principal minimum, Imin | 147,000 mm⁴ | 0.4 in⁴ |
Derived section properties
Integrated from the section's own outline including the root and toe radii, whose arcs are integrated analytically rather than approximated by facets. For 75 x 75 x 5 EA the computed area agrees with the published value to 0.22% and Ix to 0.71%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 6,491 mm³ |
| Elastic modulus, Zy | 6,491 mm³ |
| Plastic modulus, Sx | 11,897 mm³ |
| Plastic modulus, Sy | 11,897 mm³ |
| Radius of gyration, rx | 23.0 mm |
| Radius of gyration, ry | 23.0 mm |
| Principal maximum, Imax (derived) | 567,291 mm⁴ |
| Principal minimum, Imin (derived) | 147,736 mm⁴ |
| Principal axis angle, θp | 45.0° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AS/NZS 3679.1 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API