75 x 75 x 6 EA
EA · AS/NZS 3679.1 · Australia / New Zealand
75 x 75 x 6 EA is a ea 75.0 mm deep with a 75.0 mm flange, weighing 6.8 kg/m. The dimensions below are the published AS/NZS 3679.1 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open 75 x 75 x 6 EA in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 75.0 mm | 2.95 in |
| Flange width, bf | 75.0 mm | 2.95 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 6.0 mm | 0.236 in |
| Mass per metre | 6.8 kg/m | 4.6 lb/ft |
| Area, A | 867 mm² | 1.34 in² |
| Second moment, Ix | 454,500 mm⁴ | 1.1 in⁴ |
| Second moment, Iy | 454,500 mm⁴ | 1.1 in⁴ |
| Principal maximum, Imax | 722,000 mm⁴ | 1.7 in⁴ |
| Principal minimum, Imin | 187,000 mm⁴ | 0.4 in⁴ |
Derived section properties
Integrated from the section's own outline including the root and toe radii, whose arcs are integrated analytically rather than approximated by facets. For 75 x 75 x 6 EA the computed area agrees with the published value to better than 0.01% and Ix to 0.04%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 8,347 mm³ |
| Elastic modulus, Zy | 8,347 mm³ |
| Plastic modulus, Sx | 15,286 mm³ |
| Plastic modulus, Sy | 15,286 mm³ |
| Radius of gyration, rx | 22.9 mm |
| Radius of gyration, ry | 22.9 mm |
| Principal maximum, Imax (derived) | 722,283 mm⁴ |
| Principal minimum, Imin (derived) | 187,037 mm⁴ |
| Principal axis angle, θp | 45.0° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AS/NZS 3679.1 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API