75 x 75 x 8 EA
EA · AS/NZS 3679.1 · Australia / New Zealand
75 x 75 x 8 EA is a ea 75.0 mm deep with a 75.0 mm flange, weighing 8.7 kg/m. The dimensions below are the published AS/NZS 3679.1 values; the drawing is generated from them.
Analyse this section, or combine it with plates and other shapes.
Open 75 x 75 x 8 EA in the Section CalculatorFree, no sign-up, runs in your browser.
Published dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth, d | 75.0 mm | 2.95 in |
| Flange width, bf | 75.0 mm | 2.95 in |
| Flange thickness, tf | — mm | — in |
| Web thickness, tw | 7.8 mm | 0.307 in |
| Mass per metre | 8.7 kg/m | 5.9 lb/ft |
| Area, A | 1,110 mm² | 1.72 in² |
| Second moment, Ix | 575,000 mm⁴ | 1.4 in⁴ |
| Second moment, Iy | 575,000 mm⁴ | 1.4 in⁴ |
| Principal maximum, Imax | 913,000 mm⁴ | 2.2 in⁴ |
| Principal minimum, Imin | 237,000 mm⁴ | 0.6 in⁴ |
Derived section properties
Integrated from the section's own outline including the root and toe radii, whose arcs are integrated analytically rather than approximated by facets. For 75 x 75 x 8 EA the computed area agrees with the published value to 0.19% and Ix to better than 0.01%. Where a value is also published, the published one above is the one to quote.
| Property | Value |
|---|---|
| Elastic modulus, Zx | 10,707 mm³ |
| Elastic modulus, Zy | 10,707 mm³ |
| Plastic modulus, Sx | 19,549 mm³ |
| Plastic modulus, Sy | 19,549 mm³ |
| Radius of gyration, rx | 22.7 mm |
| Radius of gyration, ry | 22.7 mm |
| Principal maximum, Imax (derived) | 913,124 mm⁴ |
| Principal minimum, Imin (derived) | 236,923 mm⁴ |
| Principal axis angle, θp | 45.0° |
Z is the elastic modulus and S the plastic modulus, following AS 4100. Under AISC 360 the letters are reversed — S is elastic and Z is plastic.
Neighbouring sizes
Where these numbers come from
Published AS/NZS 3679.1 values. How StructureCalcs verifies its numbers · Understanding steel section properties · Query this section over the API