Report Builder · Example
Combined Structural Calculation Package
The whole thing, cover to cover: a load take-down, a steel beam AND a roof truss, results tables and a design summary — every feature of the builder in one submission-ready package.
What this example shows
- A cover page with the firm logo, a page-numbered header/footer, and a table of contents across multiple pages.
- A paste-from-Excel load take-down with live =SUM formulas, a merged total row and column widths.
- Real typeset equations, a solved extruded BEAM diagram AND a solved extruded TRUSS with gusset joints.
- Solver results tables for both — beam reactions and the full truss member-force schedule.
- Figure and table numbering with self-updating cross-references, tags, and bullet/numbered lists.
The model, and what it works out to
| Contents | A load take-down, a steel beam and a roof truss in one submission |
|---|---|
| Derived load | 8.0 kN/m from the take-down schedule |
| Beam B1 | 6.0 m span plus a 2.0 m overhang, with a 15 kN·m applied end moment |
| Beam reactions | 11.5 kN at A, 12.5 kN at B |
| Overhang moment | −15 kN·m hogging, carried back into the back span |
| Truss T1 | Warren, four panels at 4.0 m over a 3.0 m height, 20 kN per bottom-chord node |
Every number above is worked in the document itself — by hand first, then against the StructureCalcs solver — and the downloadable .screport file carries the live model, so you can open it in the Report Builder and change any input.
The first pages
Download for the full reportA preview of the opening pages, rendered by the same engine that produces the download.
Every number in this report is produced by the StructureCalcs engine from a verified model — the figures are solver-exact and the model travels inside the .screport, so opening it in the builder reconstructs the analysis and lets you carry on.