Report Builder · Example
Fink Roof Truss — Member Force Schedule
The member-force schedule you hand the fabricator: every axial force, tension or compression, beside an extruded truss with gusset joints colored by force.
What this example shows
- A cover page with the firm logo, and a ruled header + page-numbered footer throughout.
- An extruded truss diagram with gusset-plate joints, colored by force — the rafters in compression, the bottom chord in tension.
- A member-force schedule lifted straight from the solver: every member, tension-positive, plus the support reactions.
- A numbered method-of-joints procedure and tagged design notes an editor can filter in the builder.
- Automatic figure and table numbers with self-updating cross-references.
Title page + logoHeaders & footersTruss diagram + gusset jointsMember-force tableNumbered listsTagsCross-references
The model, and what it works out to
| Structure | Fink (W) roof truss T3 — statically determinate |
|---|---|
| Span and rise | 12.0 m span, 3.0 m rise |
| Load | 10 kN at each top-chord panel point |
| Reactions | 15 kN vertical at each support, by symmetry |
| Output | Axial force in every member, tension and compression |
| Method | Method of joints, checked against the solver |
Every number above is worked in the document itself — by hand first, then against the StructureCalcs solver — and the downloadable .screport file carries the live model, so you can open it in the Report Builder and change any input.
The first pages
Download for the full reportA preview of the opening pages, rendered by the same engine that produces the download.
Every number in this report is produced by the StructureCalcs engine from a verified model — the figures are solver-exact and the model travels inside the .screport, so opening it in the builder reconstructs the analysis and lets you carry on.